According to the data, the car accidents occur more and more. More and more people lose their lives in the accident. This is what we should pay attention. The government takes so many measures to solve this matter. The manufactures also catch up the ideas to give more functions to the consumers. As I know, the car adapter is one of the new functions. But they do not know this can be one of the blasting fuses of the accidents. Here are more factors can cause the accident. Let us see together, try our best to avoid this happen.
You can put fuel neutral: Carburetor fuel-efficient car is put in neutral gear, but now more and more glide EFI car in neutral when the fuel is not necessarily. Because some speed in the car release the throttle. Fuel injection system stops oil supply. When engine speed is up to 2000 rpm to restore fuel supply, the high-speed car with a sliding block EFI will fuel. But costs of oil and put in neutral gear.
The next is speed, the slower the better run-in period: Run-in period is a period of time with the gap between the friction and wear parts to a reasonable range. In order to achieve better lubrication, If the run-in period the engine speed is too low, the crankshaft connecting rod bearings to withstand the impact of large. High speed of the cylinder wall is likely to strain. Result in early wear and tear, so the run-in period should refer to the engine speed rather than speed. The speed of Gasoline engine is in between 2000 and 3000 rpm. Diesel engine is in the 1000 to 2000 rpm.
More fuel-efficient small throttle high gear: This practice engine prone to knock, fuel cannot be completely broke the power of doing work. And the impact of linkage, resulting in early wears and tears. The lack of torque at low rpm, accelerating weakness, but fuel consumption will be increased. Fuel-efficient engines are the best way to protect the maximum torque speed. It is low in the regional work force and may be the biggest and the best fuel efficiency. And also the car adapter can be damage, if you do so.
Cars start warm-up 10 minutes: Car before the start of warm-up, can get a better lubrication of mechanical parts to reduce friction and prolong life. But the warm-up time not too long, can reach the required oil lubrication can be generally recommended 5-8 seconds. Too long, it will only result in fuel consumption and engine wear.
In fact, if we pay more attention on the details, we can avoid much wastage. The most important is that you can keep the family be unabridged